How Do I Discover My Foscam Camera On The Network

How to add a Foscam camera connected to the LAN on the Foscam NVR via a web browser?

Overview: This article will innovate the procedure on how to add a Foscam camera connected to the LAN to a Foscam NVR organization via a web browser.
Step 1: Download and install the Equipment Search Tool on the computer that is to be used.
Direct your web browser to http://www.foscam.com/download-center/software-tools.html
Download the appropriate tool for either a Windows OS based estimator or MacOS.
Step 2: Run the Equipment Search Tool on the computer; the IP accost of the Foscam camera and NVR volition be displayed on the window.
Note: If whatever virtualization software such as Oracle VirtualBox is installed on a Windows based estimator the IP Search Tool may non function properly. VirtualBox software installs network drivers which interfere with the proper performance of the software. Temporarily disable the drivers under the Device Manager to allow the IP Search Tool to work properly.
Technical Annotation: Disable all Pop Up Blockers on the web browser that will exist used in the next step.

Step 3: Make a note of the IP Address listed on the software. Manually launch Cyberspace Explorer on Windows or Safari if you are using MacOS. Double clicking the above link will launch the default browser configured in the operating system and it may not part properly.
•   Enter the IP Address and port number of the NVR in this format.
•   Instance: http://192.168.xv.24:88
Footstep 4: If this is the start fourth dimension the web browser is being used to log into this NVR a web browser plugin must be installed earlier continuing.
For how to install the plug-in on Windows, please see here
For how to install the plug-in on MAC, please see here
Stride 5: If the installation of a web browser plugin was required re-launch the web browser later on the installation is completed. Re-enter the IP address of the NVR system into the address bar. Be sure to verify the Pop Up Blocker is withal disabled.
•   Enter the IP Address of the NVR in this format
•   Case:http://192.168.xv.24:88

Step 6: Navigate to Parameter Configuration → Adding Devices Select the channel and click on the photographic camera on the current LAN IP listing which is to be added to the NVR organisation. Input the username and password for the camera existence added and click "Add"

Repeat Step 6 if there are multiple cameras that are beingness added to the NVR organisation. Each camera volition have to be individually added and Added to the NVR for the system to access them all. Each camera will need to be assigned a Aqueduct assignment. It is recommended that the Aqueduct assignments are mapped ahead of time before assigning them to the system.
Be certain to cheque other FAQ documents and the Pedagogy Transmission to configure the cameras for your setup and alarm monitoring schedule.

Was this commodity helpful?

Source: https://www.foscam.com/faqs/view.html?id=73

Posted by: bivonasagen1999.blogspot.com